Table of Contents
Advertisement
SNMP Traps Enabled: Check this box
not checked, all SNMP traps are disabled.
Up/Down Trap Enabled: Check this box
Link
generated for each link up and link down event.
Save Traps: Click the Save Traps button to save changes to the SNMP trap settings.
3.10.1 Change SNMP Community
Each entry in the SNMP Community Management table may be changed individually.
Click the Chg button adjacent to any entry to modify the settings.
Index: Display the unique reference number for this entry.
Community Name: Enter or modify the SNMP community name for this entry.
Access Rights: Select the access permissions for this entry.
None: Deny read and write permission for this entry.
Read: Grant read access permission only for this entry. Deny write permission.
Write: Grant write access permission only for this entry. Deny read permission.
Read&Write: Grant read and write access permission for this entry.
Change Community: Click the Change Community button to copy these settings to the
community settings table. This action does not permanently save changes. To save
changes to the community settings you must also click the Save Comm button in the
SNMP Configuration screen.
70-00072-01-06a
Figure 16: Web - SNMP Community Configuration Screen
Proprietary Redline Communications © 2008
AN-80i
to enable SNMP traps to be sent. If the box is
to enable an SNMP trap to be
Page 39 of 96
User
Manual
June 1, 2008
Advertisement
Table of Contents
