1. Manuals
  2. Brands
  3. Redline Communications Manuals
  4. Wireless modules
  5. RedCONNEX AN-80i
  6. Quick install manual

Redline Communications AN-80i Quick Install Manual

Hide thumbs Also See for AN-80i:
Table of Contents

Advertisement

Quick Links

Download this manual
1

Safety Notices

Do not exceed the described limits on product labels. Position power cords to avoid
1.
damage. Do not overload wall outlets. Protect equipment by disconnecting power when
not in use.
Do not place PoE power adaptor on or near a direct heat source or operate near water
2.
or in a wet location. Disconnect the PoE power before cleaning and use only a damp
cloth for cleaning. Do not use liquid or aerosol cleaners.
The AN-80i unit must not be located near power lines or other electrical power circuits.
3.
The AN-80i must be properly grounded to protect against power surges and
4.
accumulated static electricity. It is the user's responsibility to install this device in
accordance with the local electrical codes and building codes: grounding of the
transceiver unit, mast, lead-in wire and discharge unit, location of discharge unit, size of
grounding conductors and connection requirements for grounding electrodes.
2

Important Service Information

Refer all repairs to qualified service personnel. Do not remove the covers or modify any
1.
part of this device, as this voids the warranty.
Locate the serial numbers and record these on your registration card for future
2.
reference. Record the MAC address located on the AN-80i.
3

AN-80i User Documentation

The RDL-80i system user manuals are available online at Redline Partner support portal. If you
can not access the Redline support portal directly, contact your Redline partner or sales
representative to obtain electronic copies of the RDL-3000 system documentation (Adobe PDF
format).
70-00074-01-09
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
AN-80i
Advanced Broadband Wireless
Infrastructure Solutions
Quick Install Guide
Proprietary Redline Communications © 2011
Page
1
of 8
March 16, 2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AN-80i and is the answer not in the manual?

Questions and answers

Related Manuals for Redline Communications AN-80i

Summary of Contents for Redline Communications AN-80i

  • Page 1 Disconnect the PoE power before cleaning and use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. The AN-80i unit must not be located near power lines or other electrical power circuits. The AN-80i must be properly grounded to protect against power surges and accumulated static electricity.
  • Page 2 You will require the following to perform these tests: Identify the RF channel(s) to be used. Obtain a valid Options Key for each AN-80i unit. This key (string of numbers, letters, and dashes) must be entered into AN-80i configuration to allow full operation of the wireless link.
  • Page 3 AN-80i Installation Guidelines Figure 1: AN-80i Indoor Test Connection Diagram Figure 2: AN-80i Outdoor Test Connection Diagram 70-00074-01-09 Page of 8 March 16, 2011 Proprietary Redline Communications © 2011 4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
  • Page 4 Click Product Options in the left hand menu of the Web screen and enter the options key for the this AN-80i unit. Every options key is unique to the MAC address of an AN-80i and keys cannot be reused. Option keys are provided by your local Redline equipment supplier.
  • Page 5 Install the AN-80i, mounting bracket, and antenna. The maximum length of the Ethernet cable is 100 m (328 ft). For example, 98 m from the AN-80i to the PoE, and then 2 m from the PoE to the network equipment connection.
  • Page 6 AN-80i Installation Guidelines Mounting Brackets 8.1 Heavy-Duty Mounting Option Figure 4: AN-80i with 80i-HD-MNT Mounting Kit 8.2 Lightweight Mounting Option Figure 5: AN-80i with 80i-LD-MNT Mounting 8.3 Stand-Alone Mounting Option Figure 6: AN-80i with 80i-SA-MNT Mounting Kit 70-00074-01-09 Page of 8 March 16, 2011 Proprietary Redline Communications ©...
  • Page 7 Make all necessary changes to the AN-80i subscriber station configuration before connecting to the network. Use a CAT-5 Ethernet cable to connect the data network to the Data In port on the PoE power adapter. Refer to the AN-80i User Manual and AN-80i Installation Guidelines manual for further details.
  • Page 8 70-00074-01-09 Proprietary Redline Communications © 2011 Page of 8 March 16, 2011 4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

Table of Contents