Load; New; Table 21: Cli - Load; Table 22: Cli - New - Redline Communications RedCONNEX AN80IB User Manual

√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
5.3.7

Load

Use the load command to load an ID table from non-volatile memory.
PTP PMP
√
5.3.8

New

Use the new command to create a new link, group, or connector ID.
PTP PMP
√
70-00072-01-06a
ldllfr: Downlink lost frames counter.
ldlrblk: Downlink retransmitted blocks counter.
ldlrssi: Downlink RSSI.
ldlsnr: Downlink SINADR.
llostc: Link lost Connection counter.
lrcon: Number of link registered Connections.
lscode: Link status code.
lulblk: Uplink total blocks counter.
lulbr: Uplink burst rate.
luldblk: Uplink discarded blocks counter.
lullfr: Uplink lost frames counter.
lulrblk: Uplink retransmitted blocks counter.
lulrssi: Uplink RSSI.
lulsnr: Uplink SINADR.
luptime: Link up-time.
regconn: Number of configured Connections.
regstations: Number of configured stations.
uldpkt: Uplink discarded packets counter.
ulrpkt: Uplink Rx packets counter.
ultpkt: Uplink Tx packets counter.
werxpkt: Wireless Eth Rx packets counter.
werxpktdis: Wireless Eth Rx discarded packets counter.
werxpkterr: Wireless Eth Rx packets with errors counter.
wetxpkt: Wireless Eth Tx packets counter.
wetxpktdis: Wireless Eth Tx discarded packets counter.
wetxpkterr: Wireless Eth Tx packets with errors counter.
Parameter/Description
load
idtable - Load all IDs from saved (FLASH) memory.
Parameter/Description
new
<id_type> - [link | group | conn]
<id> - <id number>
Proprietary Redline Communications © 2008
AN-80i
Table 20: CLI - get

Table 21: CLI - load

Table 22: CLI - new

Manual
Page 66 of 96
User
June 1, 2008