Table of Contents
Advertisement
3.7
Users Management
Click
Users Management
This screen allows the operator to modify the system passwords.
The AN-80i supports two groups of users: admin and user. See Table 7: Web - Default
System Users on 35 for the factory default login values. See Table 6: Web - Screens
and User Access on page 35 for permissions associated with each group.
Important
on the AN-80i. You can not manage the AN-80i if all accounts are 'user'.
Change User Settings
Use this dialog to change the settings for an existing user.
User name: Select an existing user to be modified.
Group: Select the group to be associated with this username.
New Password: Enter the new password for this user.
Confirm Password: Re-enter new password for this user.
Admin Password: Enter the administrator password (security feature).
Change: Click the Change button to make these changes effective.
Add User
Use this dialog to add a new user.
User name: Enter a name for the new user (15 characters max.).
Group: Select a group for the new user.
New Password: Enter a password for the new user (15 characters max.).
Confirm Password: Re-enter the password for the new user.
70-00072-01-06a
in the left hand menu to display the System Password screen.
: There must always be at least one 'administrator' account active
Figure 12: Web - System Password Screen
Proprietary Redline Communications © 2008
AN-80i
Page 34 of 96
User
Manual
June 1, 2008
Advertisement
Table of Contents
