Get; Table 20: Cli - Get - Redline Communications RedCONNEX AN80IB User Manual

5.3.6

Get

Use the get command to view system parameters. Use the following general format to
view a parameter:
get [field] <Enter>
PTP PMP
√
√ √
√ √
√ √
√ √
√ √
√ √
√
√ √
√
√
√
√
√ √
√ √
√ √
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
70-00072-01-06a
Parameter/Description
calcdst: Calculated link distance between units.
erxpkt: Number of Ethernet packets received.
erxpktd: Number of Ethernet packets received that were discarded.
etxpkt: Number of Ethernet packets transmitted.
mac: AN-80i MAC address.
radiotype: Radio type.
rffreq: Current RF frequency setting.
rflink: Status of the RF link.
rfstatus: Status RF transmitter.
rssimax: Maximum RSSI.
rssimean: Mean RSSI.
rssimin: Minimum RSSI.
sinadr: Ration of signal to interference + noise.
swver: List the downloaded software versions.
sysuptime: Display the time since the last reboot.
txpower: Current Tx power setting.
ubrate: Current UBR value.
wrxpkt: Number of wireless packets received.
wrxpktd: Number of wireless packets received that were discarded.
wrxpktr: Number of wireless packets that were retransmitted.
wtxpkt: Number of wireless packets transmitted.
wtxpktd: Number of wireless packets transmitted that were discarded.
wtxpktr: Number of wireless packets that were retransmitted.
activeids: Number of active IDs.
activelinks: Number of the active links.
boardtype: Board type.
dldpkt: Downlink discarded packets counter.
dlrpkt: Downlink Rx packets counter.
dltpkt: downlink Tx packets counter.
idenable: ID status.
lactive: Link active status.
ldlblk: Downlink total blocks counter.
ldlbr: Downlink burst rate.
ldldblk: Downlink discarded blocks counter.
Proprietary Redline Communications © 2008
AN-80i

Table 20: CLI - get

Manual
Page 65 of 96
User
June 1, 2008