Table of Contents
Advertisement
4.7.2
VLAN Configuration
Use these steps to convert the system from pass-through operation to VLAN tagged connections.
Step 1: Change Group to VLAN Tagged
Click Groups to display the Groups Configuration screen.
1.
Click Config to edit the Group configuration.
2.
Set the mode to Tagged in the Group Tagging Mode field.
3.
Enter the VID for this group in the Group VLAN ID field.
4.
Click the Apply button to save and activate these settings.
5.
Step 2: Change Connections to VLAN Tagged
Click Groups in the menu to display the Groups Configuration screen.
1.
Click Expand to view all connections for that Group.
2.
Choose a connection and click Config to edit the Connection Configuration.
3.
Set the mode to Tagged in the Connection Tagging Mode field.
4.
Enter the VLAN ID for this connection in the Connection VLAN ID field.
5.
Click the Apply button to save and activate these settings.
6.
Repeat steps 1 through 6 for each Connection in the Group.
7.
Step 3: Save Configuration
Click Save in the left-hand menu to permanently save and activate all settings. The system will
now pass only VLAN tagged traffic.
70-00072-01-06a
Proprietary Redline Communications © 2008
AN-80i
Page 61 of 96
User
Manual
June 1, 2008
Advertisement
Table of Contents
