Table of Contents
Advertisement
DFS Enabled: Indicate the status of the DFS feature. Refer to section 3.6: System
Configuration Screen on page 25 for a complete description of the DFS feature.
Enabled: The DFS feature is activated. See
Disabled: The DFS feature is disabled.
DFS Action: Indicates the last DFS action taken by the AN-80i equipment. All DFS
actions are recorded in the event log.
None: The DFS feature is disabled.
Tx Off: Transmitter was switched off for 30 minutes.
Chg Freq: Transmitter was switched to a different frequency.
Link Distance [Miles or Km]: Distance between wireless systems. This may be the
calculated or user-assigned distance (
Status Code: Code indicating the condition of the AN-80i system. Status indications are
specific for PMP and PTP operation.
Ethernet MAC Address: System hardware address (also printed on product label).
IP Address: User-assigned IP address of the AN-80i.
IP Subnet Mask: User-assigned IP subnet mask.
Default Gateway Address: User-assigned IP for the default router or gateway.
Ethernet LAN Statistics
Rx Packets: Total packets received on the Ethernet port.
Rx Packets: Discarded: Total valid Ethernet frames received on the Ethernet port that
are discarded due to lack of buffer space.
Tx Packets: Number of packets transmitted on the Ethernet port (including Ethernet frames
and error correction bytes).
Wireless Statistics
Link ID: A unique
Received Signal Strength: Min: Minimum measured RSSI value.
Received Signal Strength: Mean: Average measured RSSI value.
Received Signal Strength: Max: Maximum measured RSSI value.
SINADR: Ave. signal to interference, noise, and distortion ratio measured since last refresh.
Rx Packets: Total number of packets received over the wireless interface.
Rx Packets: Retransmitted Number of wireless packets received that were retransmitted
by the remote-end system (ARQ mechanism re-transmitting unacknowledged packets).
Rx Packets - Discarded: Number of received packets discarded due to errors.
Tx Packets: Number of packets transmitted over the wireless interface.
Tx Packets - Retransmitted: Number of packets re-transmitted over the wireless interface
(ARQ mechanism re-transmitting unacknowledged packets).
Tx Packets: Discarded: Total number of packets transmitted over the wireless interface
that were not acknowledged (discarded by remote-end due to errors).
Controls
Reset Statistics: Click this button to zero the counters for the wireless and Ethernet LAN
Statistics displayed on this page.
70-00072-01-06a
value is generated automatically when a new link is added.
Link ID
Proprietary Redline Communications © 2008
AN-80i
DFS Action
System Configuration
Page 21 of 96
User
Manual
below.
screen).
June 1, 2008
Advertisement
Table of Contents
