Functional Description; Overview; Figure 21: Pmp - Basic Pass-Through Group Configuration; Figure 22: Pmp - Vlan Tagged Traffic Example - Redline Communications RedCONNEX AN80IB User Manual

Table of Contents

Advertisement

4.3

Functional Description

4.3.1

Overview

The AN-80i can operate as a VLAN-aware wireless switch, as a standard wireless bridge
(pass-through mode), or a combination of both. The following figure illustrates a simple
pass-though configuration. This configuration does not use VLAN tagging or filter the
Ethernet traffic.
The following diagram illustrates a network implementation using two VLAN groups. The
packets tagged with VID=107 are classified as data traffic, while the packets tagged with
VID=108 are classified as voice traffic.
70-00072-01-06a

Figure 21: PMP - Basic Pass-through Group Configuration

Figure 22: PMP - VLAN Tagged Traffic Example

Proprietary Redline Communications © 2008
AN-80i
Page 44 of 96
User
Manual
June 1, 2008

Advertisement

Table of Contents
loading

This manual is also suitable for:

Redconnex an-80i

Table of Contents