5.3.15 Snmpcommunity; Table 29: Cli - Snmpcommunity - Redline Communications RedCONNEX AN80IB User Manual

√ √
* Status codes are displayed in binary format. See section 6.4: Status Codes on

5.3.15 Snmpcommunity

Use the snmpcommunity command to configure SNMP community permissions.
PTP
√
70-00072-01-06a
Table 28: CLI - show
stats
<id> - <id>
Example:
(show)# stats 14
General Information:
sysname = abcdef
sysdescr = b
sysloc = c
syscontact = d
mac = 00:09:02:00:bb:77
boardtype = AN-80i Rev 1.0
radiotype = T54i
swver = 10.00.023 (other: 10.00.019)
sysuptime = 8 day(s), 20 hr, 19 min
sysstarttime = N/A
sysmode = pmpsc
rffreq = 5490.0
txpower = 10
chwidth = 20 MHz
rfstatus = 0 *
page 83 for details of the RF status codes.

Table 29: CLI - snmpcommunity

PMP Description
√ add: add a new snmp community to the snmp community table. The
index value is assigned automatically. Up to eight community entries can
be entered in the table.
snmpcommunity add <name> <string> <Enter>
snmpcommunity add <rights> 0 | r | w | rw <Enter>
Where.
0 (zero):Deny read and write permission.
r: Grant read access permission only. Deny write permission.
w: Grant write access permission only. Deny read permission.
rw: Grant read and write access permission for this community.
default: Set all snmp parameters to factory default settings.
snmpcommunity default <idx> <Enter>
del: Delete the specified community entry.
snmpcommunity del <idx> <Enter>
print: List all SNMP communities and associated permissions.
snmpcommunity print <Enter>
Proprietary Redline Communications © 2008
AN-80i
erxpkt
erxpktd = 0
etxpkt
regstations = 0
regconn = 0
activelinks = 0
activeids = 0
werxpkt = 4592
werxpktdis = 0
werxpkterr = 0
wetxpkt = 0
wetxpktdis = 0
wetxpkterr = 0
Page 76 of 96
User
Manual
Ethernet Statistics:
= 3081
= 8089
Wireless Statistics:
Wireless Ethernet Statistics:
June 1, 2008