Table of Contents
Advertisement
4.3.2
Minimum Setup Requirements
A minimum set of parameters must be configured to enable data and management traffic
on any PMP deployment:
Create one or more
1.
wireless link operating characteristics, including the maximum uplink and downlink
modulation.
Create one or more
2.
characteristics of this group.
Create one or more
3.
membership to at least one
The following table provides a summary of the configuration shown in the pass-through
configuration diagram above. The actual
until these items have been created during configuration of the system. This
configuration passes all data traffic as a standard PMP configuration.
Group Configuration
(Sector Controller)
Group
Name
SC-1
4.3.3
Packet Classification
The AN-80i PMP deployment can be configured for use with VLAN tagged traffic,
untagged traffic, or a combination these two types. Ingress packets received on the
Ethernet port are classified into tagged or pass-through groups according to the criteria
in the following table. The
controller, while
Type
Tagged
Traffic
Pass-
Through
Traffic
70-00072-01-06a
to identify each subscriber in the sector, and set the
Links
(VLAN or pass-through) and set the operating
Groups
Connections
Group
Table 9: PMP - Basic Pass-Through Group Settings
Port
Group
Connection
VID
Tagging
Pass
NA
Through
Notes: 1. The Group ID, Conn ID, and Link ID values are assigned
automatically and must be read from the screen after items are created.
2. The QoS settings must be determined using the PMP Configuration
Group
settings apply to packets processed at the subscriber.
Connection
Table 10: PMP - Packet Classification
Description
Packet has a VLAN tag and there is a Group/Connection configured for this VID.
Sector Controller:
Packets are forwarded over the wireless link to all subscribers
with Connections to this VLAN Group.
Subscribers:
Packets are forwarded to the sector controller. The sector
controller forwards the packets to the local Ethernet port and
subscribers with Connections to this VLAN Group.
The packet does not have a VLAN tag, or no Group/Connection exists for this VID.
If a pass-through Group has not been defined, unclassified packets are discarded.
If a pass-through Group has been defined, classified packets are forwarded based
on the rules for tagged traffic. The packet VLAN information is not modified.
Proprietary Redline Communications © 2008
AN-80i
(to
) for each subscriber, to assign
Groups
.
and
Group ID
Link ID
Connection Configuration
(Subscriber)
Port
Name
Tagging
SS-1
Pass
Through
SS-2
Pass
Through
Tool.
settings apply to packets processed at the sector
Page 45 of 96
User
Manual
values are not available
Link
Group
Connection
ID
ID
VID
[L-1]
[SC-1]
NA
[L-2]
[SC-1]
NA
June 1, 2008
Advertisement
Table of Contents
