5.3.9
Ping
Use the ping command to initiate an ICMP ping command from the AN-80i.
PTP
PMP
√
5.3.10 Reset
Use the reset command to set all AN-80i statistics values to zero.
PTP
PMP
√
√
5.3.11 Save
Use the save command to copy edited parameter settings into non-volatile memory.
save [option] <Enter>
PTP
PMP
√
√
5.3.12 Script
Use the script command to save a file containing a string of CLI commands that can be
used to restore the current (active) configuration of the AN-80i.
PTP
PMP
√
5.3.13 Set
Use the set command to view and/or change a parameter.
View a parameter:
set [field] <Enter>
Change a parameter:
set [field] [value] <Enter>
70-00072-01-06a
Parameter/Description
ping
<address>
- Target IP address
<count>
- Number of ICMP packets to send [1..16].
Table 24: CLI - reset
Parameter/Description
stats: Reset the AN-80i statistics counters.
reset stats <Enter>
Table 25: CLI - save
Parameter/Description
config: Save Ethernet, wireless, and user configuration settings.
snmp: Save SNMP settings.
defaultconfig: Overwrite parameters with the factory default settings. The
following settings are not affected: system name, location, details and contact,
frequency list, SNMP configuration, IDs table (PMP only).
Table 26: CLI - script
Parameter/Description
script
<server>
- [server IP address]
<name>
- [script file name]
Proprietary Redline Communications © 2008
AN-80i
Table 23: CLI - new
Manual
Page 67 of 96
User
June 1, 2008