5.2 RENAMING AN ExISTING TEST SETUP
Display the "Select Test" screen to select one of the pre-defined test set-ups.
Press the key under > or < to select the test set-up that is to be renamed.
When the required test set-up is displayed, press the key under EDIT to display the edit test screen.
Press the key under RENAME to display the rename test screen.
Press the key under CLEAR ALL to delete the existing name then enter the required name using the
keypad.
This name could be a supplier name or a production ID such as drier identification.
Press the ENTER key to return to the edit test screen.
34 PET Plus User Manual