Connection Mains To Pump - Ametek Davenport PET Plus User Manual

3.13 CONNECTING THE PUMP TO
THE MAINS
The pump is powered from the drier block for
ease of use. Connect the special lead between
the mains input connector on the rear of the
pump (item 1) to the mains outlet on the rear of
the drier block.
The pump is switched on and off by the Vacuum
Power switch on the front panel of the drier
block.
This switch is marked O and I. The switch is ON
when the I end is pressed and OFF when the O
end is pressed.
Shown: Rear of pump
The switch also has an indicator lamp to show
when the pump is operating.
Shown: Rear of drier
Shown: Front panel on drier block
PET Plus User Manual 23