Table of Contents
Advertisement
4.4
Using the SWITCH TEST
SWITCH TEST automatically locates the switch temperature of a
thermostat.
You must enter a temperature range T
temperature is expected to be found. You must also specify the slope
rate to be used during the test in SETUP (the smaller the value, the
more accurate the results of the test and the longer the test will take).
The function can be illustrated using the following example:
Fig. 7
Press
The symbols
the function is active.
The function can be cancelled at any time by pressing
22
.
for SWITCH TEST will flash to indicate that
26-07-2004
- T
, within which the switch
min
max
.
105337
02
Advertisement
Table of Contents
