Training Mode; Selecting Training Mode - Ametek Davenport PET Plus User Manual

6.0 TRAINING MODE

6.1 SELECTING THE TRAINING MODE
The predefined test set-up called TRAINING is provided for operator training purposes. This is to
familiarise the operator with the test procedure and the equipment controls without actually testing a
sample.
Display the "Select Test" screen.
Press the key under > or < to select TRAINING.
Press the key under SELECT to display the "Analysis" screen.
This screen displays the requested barrel temperature, the actual barrel temperature, the nitrogen
pressure within the barrel and the position of the probe rod.
Note that the training mode will automatically set the barrel temperature to 295ºC, the nitrogen
pressure to 25Bar and repeatedly increase the position of the probe rod to simulate a real test.
Note that the barrel heaters are not powered when the training mode is selected.
PET Plus User Manual 39