2.5 POLYMER CHIP TRANSFER VESSEL
The Polymer Chip Transfer Vessel is an optional
item and is used to collect dried polymer from
the production hopper to check the IV of the
polymer before it is extruded.
Shown: Polymer chip transfer vessel
2.6 SAMPLE MELT POT
The Sample Melt Pot is an optional item and is
used to collect molten polymer from the produc-
tion extruder to check the IV of the polymer
during the extrusion process.
It is mainly used to collect a sample from a
textile spinneret and is not usually used when
making preforms etc.
Shown: Sample melt pot illustration
2.7 POLYMER CHIP GRINDER
The Polymer Chip Grinder is an optional item
and is used to grind polymer chips to a powder
to allow a much faster drying time.
Shown: Polymer chip grinder
PET Plus User Manual
13