Table of Contents
Advertisement
3.12 CONNECTING THE DRIER BLOCK
TO THE MAINS
Connect the mains supply lead to the switched
and fused input connector on the side of the
drier block. The mains switch has an internal
lamp and the equipment is powered when the
lamp is lit.
Only connect to the supply specified on the
Serial Number nameplate situated alongside the
mains input connector.
The front panel of the drier block also has an
indicator lamp to show when the equipment is
powered.
Shown: Mains input connector
Shown: Front panel on drier block
22 PET Plus User Manual
Advertisement
Table of Contents
