Table of Contents
Advertisement
Finally, the followers should be polished until shiny with a Scotchbrite pad, available from any super-
market.
Do NOT use a file or similar tool to clean the followers because any scratches or similar marks will
affect the IV values during the test.
7.15 VIEwING PREVIOUS TEST DATA
When a test is performed in the stand-alone mode, the test results are saved into the internal
memory. This test result is stored together with the test name ID and a Date-Time ID that is created
from the internal clock inside the equipment.
Therefore, statistics can be calculated and displayed for each of the defined test set-ups and the test
data can be easily viewed and exported.
Display the "Select Test" screen to select one of the pre-defined test set-ups.
Press the key under > or < to select the test set-up for the data that is to be viewed.
When the required test set-up is displayed, press the key under SELECT to display the "Analysis"
screen.
Press the key under RESULTS to view the individual test results.
Note that a warning message will be displayed if there is no data present for this test set-up.
PET Plus User Manual
51
Advertisement
Table of Contents
