Table of Contents
Advertisement
A PASS/FAIL indication can be provided by specifying the PASS/FAIL limits for one or more columns.
Right mouse click on the required column, e.g. "IV at Zero" then select PROPERTIES to display the
dialog shown.
Click on the LIMITS Tab at the top of the screen then set suitable PASS/FAIL limits, e.g. between 0.78
and 0.82.
Note that BOTH limits MUST be defined.
Click on the OK button to close the dialog and display the data table in colour. Any rows shown in
green pass the PASS/FAIL parameters and any rows shown in red fail the parameters.
PET Plus User Manual
99
Advertisement
Table of Contents
