Polymer Chip Grinder - Ametek Davenport PET Plus User Manual

3.16 POLYMER CHIP GRINDER

Place the grinder within easy reach of a
compressed air supply capable of providing
16cfm (0.45cmm) at 80psi (5.5 Bar).
Connect the air supply to the inlet connection at
the rear of the grinder using the supplied plastic
hose.
Unscrew the oil filler cap then fill the lubricator
with the correct grade of oil, e.g. Shell Morlina
10 or Tellus R10.
The top of the oil must be visible anywhere
inside the sight glass at the front of the lubrica-
tor.
Refit the oil filler cap after adding the oil.
Shown: Polymer Chip Grinder
Shown: Inlet connectin at rear of grinder
Shown: Oil filler location
26 PET Plus User Manual