Creating A Test File - Ametek Davenport PET Plus User Manual

16.5 CREATING A TEST FILE

Note that the test parameters (test temperature,
die dimensions and pass/fail limits) MUST be set
in the NEXYGEN Plus PET test set-up.
The parameters stored in the PET Plus are NOT
used when performing a test using the NEXYGEN
Plus PET software.
Click on the CREATE A NEW BATCH OF TESTS
button on the Welcome screen shown.
Note that if the Welcome screen is not displayed,
it can be displayed by clicking on the 9th Icon
from the left on the toolbar.
A SAVE AS dialog will be displayed as shown.
Enter the required name for this test file noting
that the file can be saved in any location, e.g. a
networked folder.
Click on the SAVE button to display the TEST
TYPE screen shown.
PET Plus User Manual 93