Ametek Davenport PET Plus User Manual page 41

Viscometer including polymer dryer and polymer grinder

Table of Contents

Press the key under TEST to display the "Pre-Test" screen.

Note that the "Pre-Test" screen will NOT be displayed if the probe is not electrically connected to the

probe socket on the rear of the vertical column. If the probe is not connected, the warning screen

below will be shown.

Also note that the intermediate screen shown below will be displayed if the barrel is not at the

required temperature.

This screen will automatically change to the "Pre-Test" screen when the barrel has stabilised at the

required temperature.

Note that the equipment MUST be set to the "Pre-Test" screen BEFORE trying to test a sample.

PET Plus User Manual

Table of Contents