Port Settings - ProSoft Technology RLX2-IHW-E User Manual

RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots

4.7.4 Port Settings

You use the P
IHx series radio.
Parameter
Baud Rate
Data Bits
Parity
Flow Control
Stop Bits
ProSoft Technology, Inc.
S parameters to specify the serial port settings of your RLX2-
ORT ETTINGS
Definition
Specifies the baud rate for the serial port on the radio. This must
match the baud rate setting on the connected serial device.
Specifies the number of data bits for the serial port on the radio. This
must match the data bits setting on the connected serial device.
Values: 5, 6, 7 or 8
Specifies the parity for the serial port on the radio. This must match the
parity setting on the connected serial device.
Values: None, Even, Odd, 1 or 0
Specifies the flow control (handshaking) mode for the serial port on the
radio. This must match the handshaking mode setting on the
connected serial device.
Values: None or Hardware
Specifies the stop bits for the serial port on the radio. The stop bits on
the radio must match the stop bits setting on the connected serial
device.
Values: 1 or 2
Configuring a Radio - Detailed Configuration
User Manual
Page 113 of 248