Port Settings - ProSoft Technology RLX2-IHW User Manual

RLX2 Industrial Hotspot Series

Port Settings

Baud Rate
Data Bits
Parity
Flow Control
Stop Bits
Page 104 of 208
Baud rate on the radio must match the baud rate on the connected serial
device.
Number of data bits (5, 6, 7 or 8). The data bits on the radio must match the
data bits on the connected serial device.
Parity (None, Even, Odd, 1 or 0). The parity on the radio must match the
parity on the connected serial device.
Flow control (handshaking) mode (None or Hardware). The handshaking
mode on the radio must match the handshaking mode on the connected
serial device.
Stop bits (1 or 2). The stop bits on the radio must match the stop bits on the
connected serial device.
ProSoft Technology, Inc.
November 3, 2016