Configuring Quality Of Service (Qos) Settings - ProSoft Technology RLX2-IHW-E User Manual

RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
4.8

Configuring Quality of Service (QoS) Settings

You use the QOS settings tab to specify the packet priority value parameters for a
RLX2-IHx series radio.
RLX2-IHx series radios always prioritize frames using QoS for packets received already
marked with a priority value. The Q
that the radio receives without any priority markings. In addition, you can map a priority
value to packets received without priority markings according to a set of matching
criteria.
Parameter
QoS Map Enable
Default Priority
ProSoft Technology, Inc.
S tab allows you to set the default priority for frames
O
Description
Specifies whether the the RLX2-IHx series radio uses the priority mapping
function.
E - The radio uses the priority mapping table to prioritize packets
NABLED
without a priority value. You must select Enabled before you can edit the QoS
Map table.
D - The radio does not set priority values for packets without a priority
ISABLED
value.
Specifies the default priority for packets received on the Ethernet interface
without a priority value (default is 0 - no priority).
Configuring a Radio - Detailed Configuration
User Manual
Page 114 of 248