Connecting To The Radio Configuration Interface - ProSoft Technology RLX2-IHW-E User Manual

RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
5.6

Connecting to the Radio Configuration Interface

This section describes how to configure a radio using a web browser such as Internet
Explorer or Firefox on your PC or other network-enabled device.
To connect to the radio web interface:
Important: Your computer or other device must be connected to the same network as the RLX2-IHx series
radio.
1 Log into the radio. You can do this in any of three ways:
In the IH Browser List view or Topography view, right-click the radio and then
o
click C
ONNECT
In the IH Browser List view or Topography view, double-click the radio.
o
Open a web browser on your PC, and then in the address bar, type
o
followed by the IP address for the radio, and then press E
http://192.168.6.10
The login screen appears in the web browser.
2 Enter the password and then click L
If the radio is set to factory defaults see Connecting to the Radio Web Configuration
Interface (page 38) for entering an initial password to enable the configuration tabs. If
you have lost the password for the radio, you can reset the radio to its default
settings. See Resetting a RLX2-IHx Series Radio (page 180).
ProSoft Technology, Inc.
.
.
OGIN
Using the IH Browser to Manage your Radios
NTER
. The default password is password.
User Manual
,
http://
. For example,
Page 135 of 248