RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
5.1.1 Refreshing the Display in the IH Browser
To refresh the display
If you have made changes to a radio's configuration, refresh the IH Browser by clearing
and scanning the display using the buttons on the toolbar.
The Erase button clears the radios from display (or from the F
C
).
LEAR
The Scan button rescans the network for RLX2-IHx series radios (or from the
F
menu choose S
ILE
5.1.2 Defining the Scan Parameters in the IH Browser
You use the Scan Setup dialog box to specify how the IH Browser refreshes the display
when scanning the network. By default, the program sends a broadcast Scan message
to all the radios at the same time, then waits for them to respond. Broadcasts are limited
to a local network, and will not be passed through a router.
If there is a router between the PC running the IH Browser and the radio, enter the IP
address of a single radio or the range of IP addresses of multiple radios. This adds them
to the IP addresses the IH Browser scans.
To define the scan parameters, from the N
Parameter
Local network scanning
interval
Additional IP addresses
Remove
New Address / Range
ProSoft Technology, Inc.
).
CAN
ETWORK
Description
Specifies how often the IH Browser scans the network before updating
the display.
Enter zero to disable automatic scanning. You can still scan the network
manually. See Refreshing the Display in the IH Browser (page 36).
Displays the IP addresses the IH Browser scans at the scanning
interval.
Removes the selected IP address or range. Click on an IP address or
address range to select it.
Enter the new IP address (in F
and T
) and then click A
O
DD
Using the IH Browser to Manage your Radios
menu, choose S
) or range of IP addresses (in F
ROM
.
User Manual
menu choose
ILE
S
.
CAN
ETUP
ROM
Page 123 of 248
Need help?
Do you have a question about the RLX2-IHW-E and is the answer not in the manual?
Questions and answers