ProSoft Technology RLX2-IHW-E User Manual page 154

RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
Each of the RLX2-IHx's in the session indicates one of the following states in the Status
column:
State
"Not Logging"
"Initializing"
"Connecting"
"Connected Waiting Data"
"Waiting for Backlog"
"Synced"
"Stopping"
"Resyncing"
"Reconnecting"
"Failed"
"NoRx"
"Failed - Stopped"
By design, the logging of each RLX2-IHx is staggered. Approximately one RLX2-IHx
connects every 10 seconds. When an RLX2-IHx is first connected, there are up to
20,000 lines of historical backlog in the RLX2-IHx that will all be retrieved by the IH
Browser.
Once this backlog is fully downloaded, the utility will calculate a time sync so that the log
entries can be timestamped accurately:
ProSoft Technology, Inc.
Description
RLX2-IHx is not selected for logging.
RLX2-IHx is selected for logging.
Attempting to connect to the RLX2-IHx.
Connected to the RLX2-IHx and waiting to receive first data.
Has received data from the RLX2-IHx and now waiting to receive the
acculmulated backlog.
The backlog has been received and is fully time synced.
The utility is stopping its logging session to the RLX2-IHx.
The time sync is being reestablished (occurs every hour).
Attempting to reconnect to the RLX2-IHx.
RLX2-IHx experienced some failure, should attempt to reconnect.
No Data received in the previous 5 sec period (not an error).
The logging session to that unit has failed.
Using the IH Browser to Manage your Radios
User Manual
Page 154 of 248