ProSoft Technology RLX2-IHW-E User Manual page 75

RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
To configure the RLX2-IHx series Repeater radios with certificates
1 Obtain the required certificate files from your IT department.
2 Log into your radio. See Connecting to the Radio Configuration Web Interface (page
38).
3 Click the B
select the EAP M
4 Enter the U
5 Click C
ERTIFICATES
enter the certificate files.
Parameter
Certificate Type
Certificate Passphrase
File Location
Don't Validate Server's
Certificate
6 Select the C
7 Click C
HOOSE
click A
PPLY
8 Click C
HOOSE
the password associated with the file, and then click A
9 Close the Certificate Management dialog box.
10 In the main window, click A
radio.
ProSoft Technology, Inc.
S tab, then in the W
ASIC ETTINGS
.
ETHOD
.
SERNAME
. This displays the Certificate Management dialog box where you
Description
Specifies the type of certificate that you are uploading. It is
important that this is set correctly as the RLX2-IHx series radio
does not distinguish between certificate types in any other way.
A CA Certificate is required for both PEAP and EAP-TLS. This
is used to authenticate the server's certificate. Additionally, for
EAP-TLS, a client certificate and private key are required.
If the certificate is encrypted, enter the passphrase that was
used to create it on the RADIUS server.
Selects the certificate file on your local PC that to be uploaded.
The radio does not validate the server's certificate.
T .
ERTIFICATE YPE
F to select CA Certificate file created previously (CAcert.pem) and
ILE
.
F to select the Client Certificate combined file (clientcert.p12) and
ILE
PPLY
S
IRELESS ECURITY
C and attempt to connect to the Master
HANGES
Configuring a Radio - Detailed Configuration
S group,
ETTINGS
.
PPLY
User Manual
Page 75 of 248