ProSoft Technology RLX2-IHW-E User Manual page 88

RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
Parameter
SD Auto Write Enable
SD Auto Clone Enable
Write SD Card
ProSoft Technology, Inc.
Description
Select this check box to have the radio write a copy of its configuration
to the microSD card whenever new settings are saved from the web
configuration interface. The radio renames previous radio configuration
files with a unique file name that allows you to audit changes made to
the radio's configuration.
Select this check box to have the radio use the configuration from the
microSD card when the radio powers up.

If a microSD card is present and has a configuration file that is
different from the radio's current configuration, the radio uses the
configuration from the SD Card.

If the configuration on the micro SD card matches the radio's
configuration, or there is no configuration file on the SD Card, then
no action is taken.

If you insert a microSD Card into a running radio, and if the
configuration file on the SD Card is different from the radio's
current configuration, the radio warns you by flashing the Signal
Strength, MOD and NET LEDs. If you reboot the radio or cycle
power to the radio, it uses the configuration from the microSD
card.
If you want to save this control as enabled (checked), either the SD
card slot in the radio must be empty, or you must enable the SD A
W E control before saving. If these conditions are not
RITE NABLE
present, the software disables this control before saving. This prevents
the unit from unintentionally reverting back to a configuration file on the
SD Card after resetting.

To use the configuration file on an SD card when this control is
already enabled, insert the SD card and cycle power to the radio.

If this control is not enabled, enable and save the setting without
the SD card inserted (click A
card, and then cycle power to the radio.
Note: Do not enable SD A
active configuration file on the SD card to be replaced when the unit
loads and saves the SD card's current configuration file.
Immediately writes a copy of the unit's configuration file to the SD
card, independent of the SD A
Configuring a Radio - Detailed Configuration
C ), then insert the SD
PPLY HANGES
W E if you do not want the
UTO RITE NABLE
W E setting.
UTO RITE NABLE
User Manual
UTO
Page 88 of 248