ProSoft Technology RLX2-IHW-E User Manual page 67

RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
Parameter
Bridging Client
Client
Auto / Specify
(Client mode only)
Client MAC
ProSoft Technology, Inc.
Description
Specifies a special mode for use where there are multiple Ethernet
devices that need to connect to any 3
Access Points (AP). This mode uses a Layer 2 Network Address
Translation mechanism, and can only work for IP-based protocols. If
using non-IP-based protocols, then specify Client mode for this radio.
See Configuring a Bridging Client Radio (page 44).
This is a special mode that allows you to transparently connect a single
Ethernet device to any non-ProSoft 802.11 a, b, g, or n Access Point
(AP). To the AP, the MAC address of the Ethernet device would appear
to be an 802.11 wireless client. Client mode supports all network
protocols. See Configuring a Client Radio (page 48).
Choose S only if the device does not send out any unsolicited
PECIFY
Ethernet packets. Try A
UTO
Specify the MAC ID of the device connected to this radio, only if the
device does not advertise its MAC address.
Configuring a Radio - Detailed Configuration
rd
-party 802.11 a, b, g, or n
first.
User Manual
Page 67 of 248