Figure 2-10 Removing The Fps Conduit Panel; Figure 2-11 Conduit Properly Secured To Fps Conduit Panel - ferrotec Temescal CV-12SLX User Manual

2.6 Cable Installation

Figure 2-11 Conduit Properly Secured to FPS Conduit Panel

CV-12SLX User Manual

Figure 2-10 Removing the FPS Conduit Panel

2 Insert the threaded end of the conduit elbow into the hole in the
conduit panel and secure the elbow with the nut provided, as shown
in Figure 2-.
3 Figure 2- shows the FPS with its conduit panel removed and with
the lugs on the ends of the HV cables properly secured to the studs
inside the FPS unit.
2-12
Section 2: Installation
0101-8292-0, Rev. C