Miscellaneous Hardware And Interconnection Cables; Figure 1-3 Ebc Main Control Unit And Hand-Held Controller - ferrotec Temescal CV-12SLX User Manual

Section 1: Introduction to the CV-12SLX
For FPS installation instructions, see section 2.4. For a description of the switches and LEDs on
the FPS front panel, see section 3.3.
FPS Specifications
Dimensions: 6.5 in. H × 6.5 in. W × 11 in. D
Weight: 14 lbs.
Input Power: 208 V ac ±10%, 3.5 A, 50/60 Hz, single-phase
Power Output: 10 V ac, 50 A, 28.5 kHz (max.), single-phase
1.4

Miscellaneous Hardware and Interconnection Cables

For a complete list of the components and cables included with the CV-12SLX, see section 2.2.
1.5 TemEBeam Controller (EBC)
In systems without a PLC-based system controller, the TemEBeam Controller (see Figure 1-3)
provides the sole means of controlling the e-beam power supply. An EBC is therefore a required
accessory for the CV-12SLX in such systems. For detailed information about controlling the CV-
12SLX from the EBC, see section 3.5 of this manual. For complete information about installing
and operating the EBC see the EBC manual (PN 101-9028-0).

Figure 1-3 EBC Main Control Unit and Hand-Held Controller

0101-8292-0, Rev. C
1.5 Miscellaneous Hardware and Interconnection Cables
1-3 CV-12SLX User Manual