Figure 5-5 Hvps Front Panel Leds With Latching Fault Leds Outlined; Figure 5-6 Interlocks Ok And Rail Undervoltage Leds; Figure 5-7 Hv Overcurrent And Hv Overvoltage Leds - ferrotec Temescal CV-12SLX User Manual

5.2 HVPS Front Panel LEDs
faults. Those LEDs are outlined in Figure 5-5.

Figure 5-5 HVPS Front Panel LEDs with Latching Fault LEDs Outlined

Figure 5-6 Interlocks OK and Rail Undervoltage LEDs

Interlocks OK LED
Turns red one or more interlocks
•
(internal or external) are not
met
Rail Undervoltage LED
LED turns red if the rail voltage falls
•
below the value specified below:
208-V units: 220 VDC (Nominal
range is 264 to 323 VDC)
400-V units: 427 VDC (Nominal
range is 509 to 622 VDC)

Figure 5-7 HV Overcurrent and HV Overvoltage LEDs

HV Overcurrent LED
LED turns red if output current is
•
more than 105% (630 mA– 636
HV Overvoltage LED
CV-12SLX User Manual 5-4
Section 5: Troubleshooting
0101-8292-0, Rev. C