Introduction To The Cv-12Slx; Product Description; Cv-12Slx Hvps Description And Specifications; Figure 1-1 Cv-12Slx Hvps Front Panel - ferrotec Temescal CV-12SLX User Manual

1 Introduction to the CV-12SLX

1.1

Product Description

The Temescal Model CV-12SLX is a 12-kW, constant voltage, high-frequency, switching electron
beam power supply. Designed to power and control up to two electron beam sources, the CV-
12SLX is compatible with sources featuring either permanent-magnet or electromagnetic
deflection. The power supply delivers up to 10 kV at 1200 mA, making it possible to achieve
substantial deposition rates in production environments. The CV-12SLX provides stable output at
all voltage levels, rapid arc recovery, ease of integration, and safety and convenience for
operating as well as service personnel.
The main components of CV-12SLX units are the HVPS (see Figure 1-1), the filament power
supply (see Figure 1-2), and the control and high-voltage cables required to connect these
components to each other and to the system's control computer.
In systems without a PLC-based system controller, a TemEBeam
required accessory for the CV-12SLX. For additional information about the EBC, see section 1.5.
1.2

CV-12SLX HVPS Description and Specifications

Figure 1-1 shows the front panel of the CV-12SLX power module, or HVPS. For a description of
its control and display features, see sections 3.2 and 5.2. For installation instructions, see
section 2.3.
0101-8292-0, Rev. C

Figure 1-1 CV-12SLX HVPS Front Panel

1-1
NOTE
TM
Controller (see Figure 1-3 is a
CV-12SLX User Manual