3.3 Switches and LEDs on the FPS Front Panel
3.2.2 HVPS Front Panel Indicators
Display Meters
Output Voltage meter (0–10 kV)
•
Emission Current meter (0–600 mA)
•
Status LEDs
Power ON LED. Turns green to indicate that the HVPS is powered up.
•
HV ON LED. Lights yellow when HVPS is powered up but HV is OFF. Turns green when the
•
HV is switched on.
Fault Indicator LEDs
For detailed information about fault indicator LEDs, see sections 5.2.2 and 5.2.3.
3.3
Switches and LEDs on the FPS Front Panel
Figure 3-2 shows the switches and LEDs on the FPS front panel.
POWER ON LED
Power ON/OFF Switch
The switches and indicators on the FPS front panel are:
Power ON/Off switch: Must be switched ON in order for unit to operate.
•
POWER ON LED: When lit, indicates that the HVPS and the FPS are both powered up.
•
CV-12SLX User Manual
Figure 3-2 Filament Power Supply Front Panel
HIGH VOLTAGE ON LED
Emission Current
Selection Switch
3-2
Section 3: Power Supply Operation
0101-8292-0, Rev. C