Section 2: Installation
0101-8292-0, Rev. C
Step
Action
1
A roll of 1/2"-wide copper strap (PN 5621-0032-0) is supplied with
the unit. Cut off a length of this strap that will easily extend from
the grounding lugs on the power module's rear panel to the
operator station's frame.
2
Secure one end of this strap to the grounding stud labeled RF GND
on the power module's rear panel (see Figure 2-4).
Figure 2-4 Rear Panel of Single Gun CV-12SLX HVPS
Figure 2-5 Rear Panel of Dual Gun CV-12SLX HVPS
2-7
2.5 Grounding Requirements
CV-12SLX User Manual