Figure 5-1 Hvps Front Panel Leds; Figure 5-2 Status Indicator Leds - ferrotec Temescal CV-12SLX User Manual

5.2 HVPS Front Panel LEDs
5.2.1 Status Indicator LEDs
Figure 5-2 points out and describes the three status indicator LEDs.
When unit is powered up but HV
•
is off, this LED is yellow
Turns green when HV is on
•
Turns green when the HVPS is
•
powered up
Power Supply Fault LED
Normally green; turns red when
•
a latching power supply fault has
occurred
5.2.2 LEDs That Indicate Nonlatching Faults
Figures 5-3 and 5-4 point out and describe the front panel LEDs that indicate nonlatching faults
(i.e., faults that do not cause the HV to be switched off). They are:
Arc/Out of Regulation
•
HV Out of Regulation
•
Filament Power
•
Filament Load Fault
•
CV-12SLX User Manual

Figure 5-1 HVPS Front Panel LEDs

Figure 5-2 Status Indicator LEDs

HV ON LED
Power ON LED
5-2
Section 5: Troubleshooting
0101-8292-0, Rev. C