5.6 Suggested Spare Parts; Figure 5-12 Extracting The Fuse Block From The Fps; Figure 5-13 Fuse Block Removed From Fps; Table 5-26 Suggested Spare Parts For 208-Volt Units - ferrotec Temescal CV-12SLX User Manual

Section 5: Troubleshooting

5.6 Suggested Spare Parts

0101-8292-0, Rev. C

Figure 5-12 Extracting the Fuse Block from the FPS

Figure 5-13 Fuse Block Removed from FPS

11 Check the fuses and replace them as necessary.
12 Push the fuse block all the way into its holder and snap its
cover back into place.
13 Reconnect the FPS input power cable.
14 Switch on facility breaker supplying power to the FPS.
15 Set the FPS ON/OFF switch to the ON position.

Table 5-26 Suggested Spare Parts for 208-Volt Units

Component/Assembly
Fuse, 6.3 A, 250 VAC
Fuse, 1 A, 600 V, CC
Diode, Fast REC, 1.2 kV, 17 A to 200 AC
Power Entry Module
Power Supply, 24 V dc, 2.7 A
Part Number
6024-7324-0
6024-7362-0
6024-7364-0
6024-7312-0
6024-7352-0
5-31
5.6 Suggested Spare Parts
CV-12SLX User Manual