Figure 2-14 Hv Conduit Properly Secured To Bracket; Figure 2-15 Control/Data Cable Connections On Fps Front Panel - ferrotec Temescal CV-12SLX User Manual

2.6 Cable Installation
2.6.4 Connecting the Control/Data Cables

Figure 2-15 Control/Data Cable Connections on FPS Front Panel

Connect HVPS-FPS cable
(PN 0620-6672-0) to J102.
CV-12SLX User Manual
3 Using the nut supplied with the conduit, secure the conduit to the
bracket as shown in Figure 2-14.

Figure 2-14 HV Conduit Properly Secured to Bracket

4 Secure the lugs on the ends of the HV cables to the feedthroughs,
as shown in Figure 2-13. Either cable can be connected to either
feedthrough, as polarity is not an issue.
Step Action
1 Plug the male end of the HVPS-FPS cable (PN 0620-6672-0) into
connector J5 on the power module rear panel (see Figure 2-4).
2 Plug the female end of the HVPS-FPS cable for Gun #1 into
connector J102 on the front panel of FPS #1 (see Figure 2-15).
2-14
Section 2: Installation
Connect FPS I/O cable
(PN 0620-6672-2) to J101.
0101-8292-0, Rev. C