MacDon M1170NT5 Operator's Manual page 221

3. Use the HPT scroll knob to move the red cursor to HEADER
SETTINGS icon (A).
4. Press the HPT scroll knob. HEADER SETUP page (A) appears.
NOTE:
The F4 shortcut button on the operator's console also will
display the HEADER SETUP page.
5. Scroll to RAISE LOWER RATES (B), and press SELECT. A
menu for adjusting header lower/raise rates opens with the
last header setting as the default starting point.
215922
OPERATION
Figure 4.182: Header Settings Icon
A
B
Figure 4.183: Set-Up Header Menu List
201
A
1037231
1037232
Revision A