MacDon M1170NT5 Operator's Manual page 150

Table 4.2 Selectable Ground Speed Limits (continued)
Direction of Travel
Cab-forward (High torque drive wheel)
Engine-forward (High torque drive wheel)
1. Press scroll knob (A) on the Harvest Performance
Tracker (HPT) while in any run screen to open the
QuickMenu system.
2. To scroll to GROUND SPEED LIMIT selectable area (A), use
the HPT scroll knob to move the red cursor.
3. Press the HPT scroll knob to select, and scroll to adjust the
ground speed limit values.
NOTE:
The ground speed limit is also changed by simultaneously
pressing the GSL shift button on the back of the GSL
and scrolling.
7. The default setting is 13 km/h (8 mph).
8. The default setting is 34.6 km/h (21.5 mph). Maximum engine-forward (road) speed varies by region based on local
regulation. The limited regions are: Germany (30 km/h), France (25 km/h).
215922
OPERATION
7
13, 19, 23, 26, 29 km/h (8, 12, 14, 16, 18 mph)
8
Figure 4.28: HPT Scroll Knob / Select Button
Figure 4.29: HPT Display
130
Selectable Ground Speed Limits
16, 34.6 km/h (10, 21.5 mph)
A
A
1014560
1014825
Revision A