16. Press and hold REEL AFT button (B) on GSL to retract the
walking beam.
17. When complete, exit the narrow transport control page by
pressing button F5 or F6 again (which ever is active). The
exit transport operation warning will display on the HPT.
NOTE:
Press F5 or F6 on the console, or HOME or RETURN on the
HPT to cancel transport operation at any time.
18. Shut down the engine, and remove the key from
the ignition.
19. Reinstall lock pins (B) into the drive wheel legs.
20. Turn walking beam lockout valve (A) to the closed position
(90° from valve).
215922
OPERATION
Figure 4.61: Transport Control Buttons
A - Reel Fore
Figure 4.62: Exit Transport Operation Warning
Figure 4.63: Narrow Transport Important Message
148
A
B
B - Reel Aft
A
B
Revision A