Header Operation; Booster Spring Kit - External; Center-Link Lifter - MacDon M1170NT5 Operator's Manual

6.3 Header Operation

Several kits are available which can augment the capabilities of the header attached to the windrower, or which allow the
windrower to be used with different types of headers.
6.3.1 Booster Spring Kit – External
This kit increases the float capacity of the windrower. Install this kit on windrowers paired with headers which weigh more
than 2812 kg (6200 lb.).
MD #B6047 – Booster Spring kit (external) includes two springs (one for each side) and mounting brackets. Kit instruction
MD #147825 is included in the bundle.
Table 6.1 Available Float Spring Kits for Different Header Types and Configurations
Header Type
D130XL
double knife, timed
D130XL
double knife, timed
D135XL
double knife, untimed
D135XL
double knife, untimed
D135XL
double knife, untimed
D135XL
double knife, untimed
D135XL
double knife, untimed
D135XL
double knife, untimed

6.3.2 Center-Link Lifter

This kit allows the Operator to remotely position the center-link cylinder without leaving the operator's station.
MD #B6617
Instruction MD #214701 included in the bundle.
215922
OPTIONS AND ATTACHMENTS
Description
9.1 m (30 ft.)
single reel,
9.1 m (30 ft.)
single reel,
10.8 m (35 ft.)
single reel,
10.8 m (35 ft.)
single reel,
10.8 m (35 ft.)
single reel,
10.8 m (35 ft.)
double reel,
10.8 m (35 ft.)
double reel,
10.8 m (35 ft.)
double reel,
Header Configuration
Transport
Transport
Upper Cross Auger
Vertical Knives
Base
Transport
Transport
Upper Cross Auger
Vertical Knives
Base
Transport
Transport
Upper Cross Auger
Vertical Knives
379
Additional
Float Spring Kits
—
MD #B6047
—
MD #B6047
MD #B6047
—
MD #B6047
MD #B6047
Revision A