Individual Parameters (Iparameters); Figure 45: Ipar Server - WAGO 750 Manual

WAGO I/O System 750
753-661/000-004 4FDI 24V PROFIsafe
11.1.1

Individual Parameters (iParameters)

The individual parameters are used to configure device functions of a safe device
such as the F I/O modules of the WAGO I/O System 750. The "WAGO Safety
Editor 75x" parameterization tool (SEDI) can be used to set the individual
parameters of WAGO F I/O modules. SEDI is the CPD tool for WAGO
F I/O modules.
It is often required during a repair to quickly replace a device without using
additional manufacturer tools for parameterization of the device functions.
To meet this requirement, the iPar server is used that offers appropriate services
for saving and restoring iParameters. The "iPar Server" is available as a function
block or as a system function within the non-safety related part of the safe PLC.
Further details about using the iPar server in conjunction with the WAGO
F I/O modules are available in an application note.

Figure 45: iPar Server

Version 1.0.0, valid from HW/SW Version 01/01
Appendix 115
Manual