Use In Hazardous Environments - WAGO 750 Manual

102 Use in Hazardous Environments

10 Use in Hazardous Environments
The WAGO I/O System 750 (electrical equipment) is designed for use in Zone 2
hazardous areas and shall be used in accordance with the marking and
installation regulations.
The following sections include both the general identification of components
(devices) and the installation regulations to be observed. The individual
subsections of the "Installation Regulations" section must be taken into account if
the I/O module has the required approval or is subject to the range of application
of the ATEX directive.
Manual
Version 1.0.0, valid from HW/SW Version 01/01
WAGO I/O System 750
753-661/000-004 4FDI 24V PROFIsafe