The Rules Of Shifting Fll From Operating To Transport Position - Belarus 1523.5 Operator's Manual

1523.5-0000010 OM

4.3.6 The rules of shifting FLL from operating to transport position

FLL is shifted from the operating position to the transport position in the following order:
- dismount the upper link hinge joint from the implement;
- unscrew counter nuts on turnbuckles 4 (figure 4.3.11) of lower links 3, 5, loosen the turn-
buckles, take the locating fixtures out of the implement axle, release connecting hinge
joints of lower links;
- separate lower links – take FLL connecting hinge joints off the implement axle;
- uplift FLL and tighten the nuts on turnbuckles;
- turn upper link 2 to the side and put it on detent 1 fixed on the FLL lever pin.
1 – detent; 2 – upper link; 3, 5 – lower links; 4 – turnbuckles.
Figure.3.11 – FLL transport position
108