Drawbar Hitches; General Information - Belarus 1523.5 Operator's Manual

1523.5-0000010 OM

4.4 Drawbar hitches

4.4.1 General information

Drawbar hitch of "BELARUS-1523.5" can be completed with drawbar elements of type DH-
2V (short towing yoke), DH–ЗV (long towing yoke), DH-2R ("python"), DH-1 (crossbeam)
and DH-1М-01(draw bar), providing coupling and transportation of trailed and semi-trailed
implements, connecting devices of which correspond to the following requirements:
- compatibility according to the coupling dimensions;
- implements are equipped with rigid drawbar hitch;
- draft poles are equipped with a device making the procedure of coupling/uncoupling with
tractor drawbar hitch easy;
- drawbar hitches of semitrailers have an adjustable support.
Tractor "BELARUS - 1523.5" has a special-purpose rear mounting device of lift type in the
form of vertical guiding plates with several openings, fixed to the rear joint face of the rear
axle body. The device is designed for mounting drawbar hitches and provides height ad-
justment of DH-2V (short towing yoke), DH-2R ("python") and DH-3V (long towing yoke).
Installation variant diagram of DH-2V (short towing yoke) is shown in figure 4.4.1.
Installation variant diagram of DH-ЗV (long towing yoke) is shown in figure 4.4.2.
Installation variant diagram of DH-2R ("python") is shown in figure 4.4.3.
Installation diagram of DH-1М-01 (draw bar) is shown in figure 4.4.4.
Installation diagram of DH-1 (crossbeam) is shown in figure 4.4.5.
Basic parameters of drawbar hitches shown in tables 4.3, 4.4, 4.5, 4,6, 4.7 and in figures
4.4.1, 4.4.2, 4.4.3, 4.4.4, 4.4.5 are given with standard rear tires (520/70R38 –single and
twinned) mounted on the tractor and with standard static radius, specified by the manufac-
turer.
109