Front Wheel Track Formation - Belarus 1523.5 Operator's Manual

3.2.11 Front wheel track formation

The front wheel track is adjusted in stages by displacing the wheels from one sideboard to
the other and by changing a position of the wheel disk in relation to the rim.
The front wheel track may have the following dimensions: 1535, 1635, 1700, 1800, 1850,
1950, 2020, 2120.
Diagrams of installation and track dimensions for tires 420/70R24 (basic configuration) are
given in table 3.5.
Table 3.5 – Front wheel track adjustment
Variants of mounting the
disk and the rim
Tractor track
Disk offset
К, mm
Х, mm
(tire 420/70R24)
+140 1535
+90 1635
-18 1850
-68 1950
86
1523.5-0000010 OM
Description of mounting
method
Main position. The inner
surface of the disk mates
with the gear group flange,
the disk is located from the
outer side of the wheel
support
Ex-works condition.
The rim is displaced in re-
lation to the disk. The in-
ner surface of the support
mates with the disk.
The rim is turned by 180°.
The disk mates with the
support inner surface.
The rim is turned by 180°.
The disk mates with the
support outer surface.