Front Ballast Weight - Belarus 1523.5 Operator's Manual

1523.5-0000010 OM

4.6 Front ballast weight

The front ballast weight is designed for preserving tractor normal controllability in
the conditions of significant front axle unloading while operating with heavy mounted ma-
chines and implements mounted onto tractor RLL and DH.
For the front ballast weight mounting three variants are possible:
ballast with one row of additional weight of 450kg (10 pieces at 45kg each) is shown in fig-
ure 4.6.1, basic configuration;
ballast with one row of additional weight of 360kg (8 pieces at 45kg each) is shown in fig-
ure 4.6.1, configuration against order;
ballast with two rows of additional weight total of 990 kg is shown in figure 4.6.2, configura-
tion against order.
1 – additional weight; 2 – string; 3 – towing device; 4 – tension bolts of additional weight
and a towing device; 5 – nut; 6 – plate; 7 – bracket.
Figure 4.6.1 – Ballast with one row of additional weight
1 – towing device; 2 – the first row of additional weight; 3 – bushing; 4 – string; 5 – right
plate; 6 – bracket; 7 – left plate; 8 – the second row of additional weight; 9 – spacer; 10 –
bracket.
Figure 4.6.2 – Ballast with two rows of additional weight
117